![canon printer mg2520 wont feed canon printer mg2520 wont feed](https://www.technipages.com/wp-content/uploads/2013/07/Pixma-MG5220.png)
Rotate the rollers two or more times.Īfter cleaning the paper feed rollers, turn on the power, then clean the paper feed rollers again. Do not touch the rollers with your fingers. If the problem is not resolved after cleaning the paper feed rollers (A) in the rear tray, turn off the power, unplug the power cord, then wipe the paper feed rollers (the center roller and the right roller) located inside the rear tray with a moistened cotton swab or the like while rotating them manually. The cleaning will be complete when the paper is ejected. (3) Hold down the Stop button until the Alarm lamp flashes orange seven times, then release it immediately. (2) Pull out the paper output tray and the output tray extension.
![canon printer mg2520 wont feed canon printer mg2520 wont feed](https://images-na.ssl-images-amazon.com/images/I/61HdYAPwWoL._SX425_.jpg)
(1) Make sure that the paper feed rollers have stopped rotating, load a sheet of A4 or Letter-sized plain paper or cleaning sheet available on the market in the rear tray. The paper feed rollers will rotate as it is cleaned. (1) Hold down the Stop button until the Alarm lamp flashes orange seven times, then release it immediately. Turn off the printer and after 5 minutes you can Turn on Printer. Make sure that the power is turned on and remove any paper from the rear tray.Ĭlean the paper feed rollers without paper. Answer (1 of 2): Canon MX490 printer cant connect wirelessly In this Condition, you can follow the below steps 1. You need to prepare: a sheet of A4 or Letter-sized plain paper or cleaning sheet available on the market Cleaning will wear out the paper feed rollers, so perform this only when necessary. In this case, clean the paper feed rollers. If the paper feed rollers are dirty or paper powder is attached to it, paper may not be fed properly.